Integra Trim Solid is the premium solid-uPVC FlexiProof edge-trim system. Its raised kerb and gutter profiles are supplied with colour-matched components for a precise, durable perimeter finish.
Choose Integra Trim Solid when the project requires the premium solid-uPVC profile or Anthracite Grey as well as Jet Black. Use its own matching corners, joiners and fixings throughout.
Solid system facts
- Premium solid uPVC extrusion
- CAD-designed profiles, corners and joiners
- Pre-drilled trim lengths with colour-matched PolyTop fixings
- Watertight foam compression seals
- Fully recyclable according to the manufacturer guide
- Jet Black RAL 9005 and Anthracite Grey RAL 7016
- Manufacturer guide positions the Solid system with FlexiProof Fleece-Backed EPDM
Raised kerb trim
The 2.5m × 100mm solid profile forms a 20mm water-check upstand. Its 10mm × 15mm foam compression strip seals against the membrane and removes the need for a separate timber upstand at that roof edge when installed as specified.
Gutter trim
The 2.5m × 100mm gutter profile fixes through its back plate to the fascia batten. The front plate and compression foam seal the membrane and form the drip edge into the gutter.
Solid versus cellular
Both families use raised kerb and gutter functions, but their construction, available colours and matching parts differ. Solid is a premium solid extrusion and is available in black and anthracite grey; Cellular is a cellular uPVC-ASA system currently offered in black.
Shop Integra Trim Solid
Shop solid raised kerb trim →
Shop solid gutter drip trim →
Shop solid corners and joiners →
Frequently asked questions
What colours are available?
The manufacturer guide lists Jet Black (RAL 9005) and Anthracite Grey (RAL 7016). Check the live variant before ordering.
Is Solid trim the same as Cellular trim?
No. The profiles and matching components belong to different systems. Do not mix them.
Does raised kerb trim stop water leaving that edge?
It forms a 20mm water check intended to direct runoff toward the gutter edge when installed correctly.
Are the lengths pre-drilled?
Yes. The manufacturer describes pre-drilled fixing positions for fast, consistent PolyTop fixing.
Need project-specific help?
Forti Nova supplies the FlexiProof system with practical product support. Send your maximum roof dimensions, deck type and details such as upstands, outlets, rooflights and corners before ordering.
Ask Forti Nova for free product advice → Training and installation support →
This web guide is based on the supplied FlexiProof manufacturer literature. Follow the current instructions supplied with the product, observe safe working-at-height practice and obtain project-specific design or structural advice where required.