PRODUCT INFORMATION
Metal Wall Flashing Trim
Standard and deep 3m wall-flashing profiles, with or without fixing packs.
Available product options
Available selections are: 3m Deep Wall Flashing Trim (38/100/3000); 3m Deep Wall Flashing Trim & Fixings (38/100/3000); 3m Standard Wall Flashing Trim (25/100/3000); 3m Standard Wall Flashing Trim & Fixings (25/100/3000).
Supplied by EPDM Rubber by Forti Nova within the FlexiProof roofing range.
How does metal wall flashing finish an EPDM roof-to-wall junction?
It protects and terminates the compatible EPDM upstand at an adjoining wall. Select standard or deep cover to suit the build-up and use the specified fixings and sealant.
Metal Wall Flashing Trim: questions answered by Forti Nova
When is wall flashing trim needed?
Use it where the membrane turns up a wall and needs a protected mechanical top termination.
What is standard versus deep flashing?
The profiles provide different cover depths. Measure the upstand and junction before choosing.
Does it replace the EPDM upstand?
No. The membrane still needs the specified upstand height and correct bonding.
How is the top edge sealed?
Use the sealant and fixing arrangement stated in the system detail.
Can it fix into weak masonry?
No. The substrate must provide secure anchorage; repair weak render or mortar first.
Can Forti Nova check the depth?
Yes. Send a section photo and dimensions.
Need a project-specific answer? Ask Forti Nova for free practical advice from installers who use these materials, or browse our EPDM roof trims and gutter-edge profiles.
